Welcome To iRES
Watch the full Interview
Prof. Massimo Simion | Prof. Giulio Rasperini | Dott. Alessandro Ribolla | Dott. Michele Franzese
Cerasorb® M Biomaterial
The reliable choice for bone regeneration

CERASORB M is resorbed from both outer and inner pore surfaces, allowing resorption at the same rate of new bone formation.

Cerasorb® Paste Biomaterial
Resorbable paste for filling in and reconstructing osseous defects with one or more walls

The hydrogel does not harden during and after the application. Thanks to its properties, the paste remains in the defect with stable volume, until complete absorption.

Cerasorb® Foam Biomaterial
Alveolus filling material with a double benefit volumetric stability and effective support during bone regeneration

The filling of the alveolar ridge to promote regeneration and new formation of autologous bone.

Collaguide® Biomaterial
Unique resorbable collagen membrane translucent, resilient, flexible

Bovine collagen membrane translucent, elastic, flexible.

Osgide Biomaterial
The ideal membrane in guided tissue regeneration and guided bone regeneration

The membrane of choice in guided tissue,regeneration and guided bone regeneration.

Epi-Guide® Biomaterial
Bioresorbable barrier matrix made of acid polylactic

Synthetic membrane ,bioresorbable ,made of polylactic acid.

Stypro® Emostatico Biomaterial
Implantable resorbable gelatine sponge for instant haemostatic control

Implantable resorbable gelatine sponge ,for instant haemostatic control.

Parasorb® HD Cone Biomaterial
Cones made of equine collagen with or without antibiotics

Cones formulated from equine collagen ,with or without antibiotic protection.

Shapeone® Implant Systems
High primary stability even in d4 bone

Platform switching. The platform switching connection occurs when the diameter of the prosthetic parts, emerging from the implant, is smaller than that of the implant platform. About 1 mm of the neck, 2.5 mm in version S1T and S1Tn (Unico), which protects more from bacterial attacks in the machined version. Cutting coronal threads for a better force discharge on cortical bone to provide excellent stability even in few millimetres. 55° triple thread over the entire body implant with a pitch of 1,8 mm (0,6 mm/thread); each turn allows going down of 1,8mm, speeding up the insertion phase. 3 apical aggressive cuts provide better primary stability while centring the implant and the possibility to change direction during its insertion. Apex aggressive but rounded to protect Schneider’s membrane.

IMAX® Implant Systems
Universal implant for all types of bone

Platform switching. The platform switching connection occurs when the diameter of the prosthetic parts, emerging from the implant, is smaller than that of the implant platform. About 1 mm of the neck, which protects more from bacterial attacks in the machined version. Cylindrical body. 55° double thread over the entire body implant for a better force discharge on cortical bone to provide excellent stability, and with a pitch of 1,2 mm(0,6 mm/thread); each turn allows to go down of 1,2mm, speeding up the insertion phase. 2 apical cuts helicoidal. Conical apex with a flat tip.

IMAXMUA® Implant Systems
No bacterial infiltration

1.5 mm of the neck. Cylindrical body. 55° double thread over the entire body implant for a better force discharge on cortical bone to provide excellent stability, and with a pitch of 1,2 mm (0,6 mm/thread); each turn allows  to go down of 1,2mm, speeding up the insertion phase.; each insertion lap allows a 1.2 mm descent. 2 helical apical cuts. Conical apex with a flat tip. The use of the retention screw for MUA components, from the current 1.4 mm to 1.72 mm to eliminate the unscrewing possibility of MUA components. A smaller size of the cone and the supporting surface, from  4.8 mm to 4 mm.  Less obstruction space to the benefit of the prosthesis.

IMAX® NHSIC Implant Systems
The conical connection with different emergency profiles

It’s proven that the cone-morse connection creates slits which are smaller (1μm) than bacteria (1,1-1,5μm length, 2-6μm diameter). Cone-morse connection absorbs vibration and chewing stress by eliminating the unscrewing of the screws (0.37%). Healing screws don’t ruin the connection, as happens in a traditional spin. Screws with a cone-morse connection block the microleakage during the healing period. Emergency profile for the mucous attachment. Range of heights, from 2.5 to 4 mm, for healing screws, temporary transfers and permanent abutments. Platform switching, a unique prosthesis for all the diameters. 2 helicoidal apical cuts. Conical apex with a flat tip. 55° double thread over the entire implant body for a better force discharge on cortical bone to provide excellent stability, and with a pitch of 1,2 mm (0,6 mm/thread); each turn allows to go down of 1,2mm, speeding up the insertion phase. 5° angled on the implant and the abutment.

VOLUTION® Implant Systems
back to the future

Hexagonal internal connection with Friction Fit to avoid micromovements and bacterial infiltrations. Machined implant neck with double platform switching and profile with toothed hermetic cover. It distributes the pressure on the cortical bone and ensures a seal that prevents the penetration of bacteria and the onset of peri-implantitis. Implant with ogival design (bullet type).

It ensures a higher penetration capacity. Pronounced spires with cutting profile. They provide higher primary stability and self-tapping properties. Higher stability in soft bone 3⁄4 and less compression in hard bone 1⁄2). Spiral counter-unload furrows. They increase primary stability and prevent the progression of peri-implantitis, interrupting the thread that acts as a chute for bacteria. Apex with self-perforating auger design with grinding effect.

It produces bone shavings and stimulates osteogenesis. SLA type surface treatment, the most tested and well-known surface after the machined, which ensures the best osseointegration with the lowest incidence of peri-implantitis among the surfaces, treated according to the Evidence-Based Literature.

ShapeMini® Implant Systems
Surgical Kit
One surgical kit for all implant systems

The purpose of surgical trays is to store the instruments used to insert dental implants. The kit can be carried, sterilized and kept in a horizontal position with the lid closed. All the instruments must be cleaned and sterilized before the first use.

Prosthetic Kit

The purpose of surgical trays is to store the instruments used to insert dental implants. The kit can be carried, sterilized and kept in a horizontal position with the lid closed. All the instruments must be cleaned and sterilized before the first use. The surgical kit and instruments are not sterile at the time of delivery.

ErgoKit

The purpose of surgical trays is to store the instruments used to insert dental implants. The kit can be carried, sterilized and kept in a horizontal position with the lid closed. All the instruments must be cleaned and sterilized before the first use. The surgical kit and instruments are not sterile at the time of delivery.

Ritter Implants
Superior Quality & Thoughtful Design Innovation for the Dental Community Since 1887

The Ritter Brand stands for high quality state-of-the-art technology and thoughtful innovation made in Germany.
We have a proud heritage of serving the global dental community since 1887. It is our privilege to offer high quality products to ensure a predictable experience and to better serve the needs of your patients.
Ritter implants are supported by a lifetime guarantee, soyou can remain confident, while remaining focused onyour ultimate goal of treating patients.
Our mission is to improve patient and clinicianquality of life.

SG Implants
A leap forward into a Global Dental solution company based on the concept of quality-oriented management.
In this era of applied technology in implant system, we dare started with unique and differentiated products from our idea and experi-ences. To cope with the demand of global market we proceeded on quality improvement with creative and challenging spirit.
 
SG will always keep on watching on and listening to all people`s need as we have been. We also have full belief that there shall be no ending to the research and development for human safety and comfort. So that, all our staffs always keep humble mind to our guests in this world. Dear guests!
Contact Information
YAPI KİMYASALLARI SAN. Ve TİC.LTD.ŞTİ.Yakuplu Mah. Hürriyet Bulvarı,Skyport No : 1 / 80 Beylikdüzü / İSTANBUL
+90 212 876 89 69
+90 533 503 18 74
info@basgroupcorp.com
Who We Are?
BAŞ GROUP, an international chemical trading company with offices in İstanbul, was established in late 2017 to act as a bridge between chemical producers and chemical markets. Its mission was to capitalize on downsizing trends in the chemical industry by serving established, reputable chemical distributors and users in developing countries and secondary markets that are not supplied directly by major international producers. The company's main line of products includes polymers, construction chemicals, epoxy hardener, epoxy resins, detergents feed, food, medical.
copyright © 2019 all rights reserved